| ←Older revision | Revision as of 00:52, 29 January 2020 | ||
| Line 44: | Line 44: | ||
|
#Open the garage door all the way to release spring tension. Press the button on the opener, if the door has one, to open the garage door all the way. Lift the door all the way open with the handle if there is no opener.<ref>https://ift.tt/2RB9S5t>
|
#Open the garage door all the way to release spring tension. Press the button on the opener, if the door has one, to open the garage door all the way. Lift the door all the way open with the handle if there is no opener.<ref>https://ift.tt/2RB9S5t>
|
||
|
#*Adjustments to side-mounted springs must be made with the door fully open so that there is no tension on them.
|
#*Adjustments to side-mounted springs must be made with the door fully open so that there is no tension on them.
|
||
| − |
#Use the emergency release cord to disconnect the
|
+ |
#Use the emergency release cord to disconnect the opener, if the door has one. Grab the handle at the end of the cord. Pull it down and back towards the opener to release it.<ref>https://ift.tt/2RAx2ZO>
|
|
#*Even if the garage door is all the way open, the springs can still have some tension on them when connected to an opener. Using the emergency release cord will ensure that there is no tension on them before you make adjustments.
|
#*Even if the garage door is all the way open, the springs can still have some tension on them when connected to an opener. Using the emergency release cord will ensure that there is no tension on them before you make adjustments.
|
||
|
#Put a C-clamp on both tracks below the lowest door rollers. Loosen a C-clamp so that you can slip it over the track on 1 side of the door. Place it over the track just below the bottom-most roller, then tighten it as much as possible. Repeat this on the other side.<ref>https://ift.tt/2RAx2ZO>
|
#Put a C-clamp on both tracks below the lowest door rollers. Loosen a C-clamp so that you can slip it over the track on 1 side of the door. Place it over the track just below the bottom-most roller, then tighten it as much as possible. Repeat this on the other side.<ref>https://ift.tt/2RAx2ZO>
|
||
from wikiHow - Recent Changes [en] https://ift.tt/2GAet1a
via IFTTT
